Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel on a Kawasaki Versys 1000

Model: Kawasaki Versys 1000
Part: Wheel

Video tutorial

In this tutorial, you will see how to remove the front wheel on a Kawasaki Versys 1000, a very simple and quick operation. First, position yourself in front of the left brake.

Then, remove the sensor by unscrewing the corresponding bolt. Next, remove both calipers, take off the mudguard, loosen the two fork bolts using a 6mm hex key, and extract the large central fixing pin. At this point, simply separate the wheel from the fork, insert the replacement if necessary, and reassemble everything by following the reverse procedure.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Tyre of the Kawasaki Versys 1000
How to Replace the Front Tyre of the Kawasaki Versys 1000
Versys 1000 This guide will show you the steps to remove and replace the front tyre of the Kawasaki Versys 1000 motorcycle. First, place the motorcycle on its ce…
How do you replace the exhaust pipe of the Kawasaki Versys 1000?
How do you replace the exhaust pipe of the Kawasaki Versys 1000?
Versys 1000 It will be possible to replace the exhaust installed on the Kawasaki Versys 1000 by loosening the screws that fix the exhaust terminal to its housing…
How to Replace the Spark Plugs on the Kawasaki Versys 1000
How to Replace the Spark Plugs on the Kawasaki Versys 1000
Versys 1000 Today, follow these instructions to remove and replace the spark plugs on the Kawasaki Versys 1000 engine. First, place the motorcycle on a stand and…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos