Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kawasaki Z900
Part:

In order to replace the levers of the Kawasaki Z900, you need to loosen the bolts that fix the lever to the side of the handlebars, so that it can be removed from its housing: once the lever is detached, you can also loosen the bolt that secures the brake or clutch cable connected to the lever. This way you can proceed by completely removing the old lever and inserting the new one: the new lever can be fixed with the corresponding bolt to ensure that everything works correctly.

Posted on 27 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Z900 In this video, discover the steps to remove and replace the brake and clutch levers on a Kawasaki Z900. First, remove the clutch lever; to do this, u…
Z900 You can replace the exhaust on the Kawasaki Z900 by loosening the screws that secure the exhaust end can to its housing, located near the rear mudgua…
Z900 To change the engine oil of the Kawasaki Z900, loosen the drain plug located at the central lower part of the bike. Once the plug is loosened, allow …

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos