Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Kawasaki Versys 650?

Model: Kawasaki Versys 650
Part: Headlight bulb

Video tutorial

In this tutorial we can see how to replace the front headlight bulbs in the Kawasaki Versys 650, an extremely simple and quick operation. First of all, make sure the key is not inserted, then locate the rubber cap on the back of the headlight in question and remove it. Next, disconnect the power connector, release the metal fixing clip and remove the old bulb.

At this point, all that remains is to insert the replacement, avoiding touching the glass directly with bare hands, and reassemble everything following the reverse procedure.


Posted on 18 May 2025 by ScegliAuto


Related tutorials

How to Remove and Install the Front Wheel of the Kawasaki Versys 650
How to Remove and Install the Front Wheel of the Kawasaki Versys 650
Versys 650 Today, discover the steps and instructions to remove and replace the front wheel of the Kawasaki Versys 650 motorcycle. First, place the motorcycle o…
Replacing the Brake Pads on the Kawasaki Versys 650
Replacing the Brake Pads on the Kawasaki Versys 650
Versys 650 Today's guide will show you the steps to remove and replace the brake pads on the Kawasaki Versys 650 motorcycle. First, place your motorcycle on the…
How to Change the Engine Oil on a Kawasaki Versys 650?
How to Change the Engine Oil on a Kawasaki Versys 650?
Versys 650 You can perform the engine oil change on the Kawasaki Versys 650 by loosening the drain plug located in the lower central area of the vehicle. Once t…

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos