Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Pads on the Kawasaki Versys 650

Model: Kawasaki Versys 650
Part: Brake pads

Video tutorial

Today's guide will show you the steps to remove and replace the brake pads on the Kawasaki Versys 650 motorcycle. First, place your motorcycle on the centre stand and start unscrewing the fixing screws found on the brake caliper to remove it from the disc; then remove the brake pads from the caliper by pressing the piston to retract it, as shown in the video.

At this point, install the new original brake pads, then remount the caliper onto the disc; replace the pads on the other caliper in the same manner!


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on a Kawasaki Versys 650?
How to Replace the Brake Pads on a Kawasaki Versys 650?
Versys 650 To replace the brake pads on a Kawasaki Versys 650, you need to perform the same operation for both the front and rear wheels: loosen the bolts secur…
How to Replace the Front Brake Pads on a Kawasaki Versys 650?
How to Replace the Front Brake Pads on a Kawasaki Versys 650?
Versys 650 To replace the front brake pads on a Kawasaki Versys 650, loosen the bolts securing the caliper to the corresponding disc. Once the caliper bolts are…
How to replace the rear brake pads on the Kawasaki Versys 650?
How to replace the rear brake pads on the Kawasaki Versys 650?
Versys 650 To replace the rear brake pads on the Kawasaki Versys 650, loosen the screws that secure the brake caliper to its housing at the top centre of the di…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos