Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Kawasaki Z900

Model: Kawasaki Z900
Part: Service warning light

Video tutorial

Today's procedure will show us the instructions that will allow us to reset the maintenance service light for the oil change on the Kawasaki Z900. First, we put the bike on the stand and start the instrument panel; in order to reset the maintenance light, it is necessary to use a specific diagnostic tool (in this case, the OBDSTAR) to connect to the OBD port of the ECU. Then, follow the guided procedure to confirm and perform the service reset, finally turning off the instrument panel and starting the engine!


Posted on 3 June 2025 by ScegliAuto


Related tutorials

Resetting the service light on the Kawasaki Z900
Resetting the service light on the Kawasaki Z900
Z900 Briefly, we will see the instructions that will allow us to perform the routine maintenance service and reset the service light on the Kawasaki Z900 …
How to Reset the Trip Meter on a Kawasaki Z900
How to Reset the Trip Meter on a Kawasaki Z900
Z900 Let’s see how to reset the trip meter on the Kawasaki Z900: switch on the bike's ignition, look at the display, and locate the button on the right si…
How to Reset the Service Light on the Kawasaki Z900?
How to Reset the Service Light on the Kawasaki Z900?
Z900 To reset the Service light on the Kawasaki Z900, you need to turn on the instrument cluster and then press both buttons located on the sides. This wi…

How to replace the piston on the Peugeot Django?

To replace the piston on the Peugeot Django, you need to completely dismantle the side fairings located under the seat: by removing these panels, you will gain access to the engine, which can be extracted from its housing by unscrewing the fixing screws and disconnecting the connectors attached to it. Once the engine is free, loosen the bolts that secure the cylinder at the top, remove the cylinder, and then detach the piston from the corresponding connecting rod. At this point, you can insert the new piston, cover it with the cylinder, and reinstall the engine in its place.

Watch the video!


by ScegliAuto

More videos