Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the gear shift light on the Kawasaki Ninja ZX 10R

Model: Kawasaki Ninja Zx 10r
Part: Onboard computer

Video tutorial

In this video we see how to adjust the gear shift light on the Kawasaki Ninja 1.0 ZX: the factory has set it at 5,000 rpm, so it is always on; to prevent it from flashing and making us think that something is wrong, we can turn it off, or change the rpm level at which it activates.

To enter the adjustment mode, press and hold the two adjustment buttons at the same time: we will see the clock start flashing.

Hold down the upper button until the gear shift light comes on, set at 5,000 rpm; to increase, press the lower button, and we will see the needle rise; release where it seems most appropriate. To go back, press firmly again.

To confirm, press the upper button. To exit, hold down both buttons.


Posted on 28 June 2025 by ScegliAuto


Related tutorials

How to Clear Error Codes Without a Scanner on the Kawasaki Ninja ZX-10R
How to Clear Error Codes Without a Scanner on the Kawasaki Ninja ZX-10R
Ninja Zx 10r In this video, learn how to clear error codes on the Kawasaki Ninja ZX-10R without needing a scanner: start the bike and let it idle for about 10 sec…
How to Perform the Maintenance Service (Oil Change) on the Kawasaki Ninja ZX-10R
How to Perform the Maintenance Service (Oil Change) on the Kawasaki Ninja ZX-10R
Ninja Zx 10r Today's instructions will illustrate how to perform the regular maintenance service by replacing the engine oil and oil filter on the Kawasaki Ninja …
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
Ninja Zx 10r In this guide, you will learn how to access the fuse box of the Kawasaki Ninja ZX-10R motorcycle. First, place the bike on a stand and start removing…

How to Adjust the Clutch on the Honda CBR 600RR?

To adjust the clutch on the Honda CBR 600RR, adjust the bolts located near the clutch lever and near the clutch cover: by tightening these bolts, you will notice that the left lever becomes stiffer, making it more difficult for the clutch to disengage. Conversely, by loosening these bolts, the clutch lever will become softer, making it easier for the clutch to engage. Once the adjustment is made, check that the clutch does not cause any issues while riding.

Watch the video!


by ScegliAuto

More videos