Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Maintenance Service (Oil Change) on the Kawasaki Ninja ZX-10R

Model: Kawasaki Ninja Zx 10r
Part: Engine oil

Video tutorial

Today's instructions will illustrate how to perform the regular maintenance service by replacing the engine oil and oil filter on the Kawasaki Ninja ZX-10R. First, place the bike on its stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Use the appropriate tool to unscrew the oil filter, replacing the cartridge with a new one (screw in by hand and tighten gently with a tool), as shown in the video.

Now, unscrew the filler cap and top up with new oil, following the instructions in the owner's manual.


Posted on 16 September 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Kawasaki Ninja ZX-10R?
How to change the engine oil in the Kawasaki Ninja ZX-10R?
Ninja Zx 10r In this tutorial, you will see how to change the engine oil in the Kawasaki Ninja ZX-10R, a very simple and quick operation. First, wait until the en…
How do you replace the air filter of the Kawasaki Ninja ZX-10R?
How do you replace the air filter of the Kawasaki Ninja ZX-10R?
Ninja Zx 10r It will be possible to replace the air filter of the Kawasaki Ninja ZX-10R by loosening the screws that secure the side panels of the motorcycle loca…
Removing the Battery from a Kawasaki Ninja ZX-10R
Removing the Battery from a Kawasaki Ninja ZX-10R
Ninja Zx 10r In this video tutorial, you will learn how to remove and replace the battery on a Kawasaki Ninja ZX-10R. First, unscrew the screws of the side plasti…

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos