Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Kawasaki Ninja ZX-10R?

Model: Kawasaki Ninja Zx 10r
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Kawasaki Ninja ZX-10R, a very simple and quick operation. First, wait until the engine is cool enough, then position a container underneath the bike, locate the drain hole bolt, and loosen it using an 18mm socket.

Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Perform the Maintenance Service (Oil Change) on the Kawasaki Ninja ZX-10R
How to Perform the Maintenance Service (Oil Change) on the Kawasaki Ninja ZX-10R
Ninja Zx 10r Today's instructions will illustrate how to perform the regular maintenance service by replacing the engine oil and oil filter on the Kawasaki Ninja …
Removing the Battery from a Kawasaki Ninja ZX-10R
Removing the Battery from a Kawasaki Ninja ZX-10R
Ninja Zx 10r In this video tutorial, you will learn how to remove and replace the battery on a Kawasaki Ninja ZX-10R. First, unscrew the screws of the side plasti…
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
How to Access the Fuse Box of the Kawasaki Ninja ZX-10R
Ninja Zx 10r In this guide, you will learn how to access the fuse box of the Kawasaki Ninja ZX-10R motorcycle. First, place the bike on a stand and start removing…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos