Do it yourself
Frequently asked questions about cars and motorcycles

How to change the motor oil of a Kawasaki Versys 650?

Model: Kawasaki Versys 650
Part: Engine oil

Video tutorial

To change the motor oil of a Kawasaki Versys 650, start by making sure the motorcycle is on a flat and stable surface, preferably on a center stand or specific stands for added safety. First of all, it is advisable to warm up the engine for a few minutes, so that the oil becomes more fluid and drains better.

Once the engine is turned off, locate the oil drain plug located at the bottom of the engine. Place a container under the plug to collect the old oil. Unscrew the drain plug with an appropriate wrench and let the oil drain completely into the container.

After allowing the oil to drain for a few minutes, clean the area around the drain plug thoroughly and tighten it back, making sure it is securely fastened to prevent leaks. At this point, remove the oil tank cap and start pouring the new specific oil for the Kawasaki Versys 650. Pour it slowly, avoiding overfilling the tank.

Once the refill is complete, start the engine for a few seconds and then turn it off, allowing the oil to distribute inside the engine.


Posted on 10 September 2025 by ScegliAuto


Related tutorials

Versys 650 Today, in this guide, we will discover the procedure necessary for performing routine maintenance by replacing the engine oil and oil filter on a Kaw…
Versys 650 Today we will discover the instructions that will allow us to perform the ordinary maintenance service, replacing the engine oil and oil filter, of t…
Versys 650 In this tutorial we can see how to replace the motor oil in the Kawasaki Versys 650, a very simple and quick operation. First of all, make sure that …

How to Change the Engine Oil in the Yamaha XMAX 300 Scooter?

In this tutorial, you will see how to change the engine oil in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap and insert the replacement. At this point, simply reassemble everything and pour in the necessary amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos