Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Kawasaki Ninja 650?

Model: Kawasaki Ninja 650
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Kawasaki Ninja 650, an extremely simple and quick operation. First of all, let's make sure that the engine is cool enough, then we remove the lower fairing and place a container underneath the bike.

Next, we locate the drain hole bolt, unscrew it using a 17mm socket wrench, and let all the oil in the system drain out. At this point, all that is left is to unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

Replacement of the engine oil cup of the Kawasaki Ninja 650
Replacement of the engine oil cup of the Kawasaki Ninja 650
Ninja 650 Today's instructions will allow us to disassemble and replace the oil sump of the Kawasaki Ninja 650. First, we put the motorcycle on the stand and s…
How to Change the Engine Oil in a Kawasaki Ninja 650?
How to Change the Engine Oil in a Kawasaki Ninja 650?
Ninja 650 This tutorial shows how to change the engine oil in a Kawasaki Ninja 650, a very simple and quick operation. First, wait for the engine to cool suffi…
How to Change the Engine Oil in a Kawasaki Ninja 650?
How to Change the Engine Oil in a Kawasaki Ninja 650?
Ninja 650 In this tutorial, see how to change the engine oil in a Kawasaki Ninja 650, an extremely simple and quick operation. First, ensure the engine is cool…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos