Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Kawasaki ZX-4R?

Model: Kawasaki Zx 4r
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in a Kawasaki ZX-4R, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then remove the lower right fairing and position a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 17mm socket, and let all the oil in the system drain out. Now, simply unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter on the Kawasaki ER-6N
How to replace the engine oil and oil filter on the Kawasaki ER-6N
Er 6n The procedure for replacing the engine oil and oil filter is quite simple and does not require special tools; here's how to service the Kawasaki ER-6…
How to replace the motor oil in the Kawasaki ZX-6R?
How to replace the motor oil in the Kawasaki ZX-6R?
Zx 6r In this tutorial we can see how to replace the motor oil in the Kawasaki ZX-6R, an extremely simple and quick operation. First of all, make sure that…
How to Change Engine Oil on a Kawasaki Z750
How to Change Engine Oil on a Kawasaki Z750
Z750 Learn how to change the engine oil on a Kawasaki Z750. Follow this guide to perform maintenance. Position the motorcycle on the original stand, remov…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos