Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Zx 6r
Part: Clock

In this tutorial, you will see how to set the time on a Kawasaki ZX-6R, a very simple and quick operation to perform, for example, after disconnecting the battery or switching to daylight saving time. First, insert the key, then turn on the instrument panel and hold the "RESET" button until the clock starts flashing. Next, press the same button again, adjust the hour using the "MODE" button, and switch to minutes with the "RESET" button. Once you have adjusted the minutes, save the setting by pressing the "RESET" button first and then the "MODE" button.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Kawasaki ZX-6R?
How to set the time on the Kawasaki ZX-6R?
Zx 6r In this tutorial, we can see how to adjust the time on the Kawasaki ZX-6R, an extremely simple and quick operation to perform, for example, after dis…
How to Set the Time on a Kawasaki ZX-6R?
How to Set the Time on a Kawasaki ZX-6R?
Zx 6r .. In this tutorial, we will see how to set the time on a Kawasaki ZX-6R, a very simple and quick operation to perform, for example, after.. …
How to Replace the Front Brake Pads on a Kawasaki ZX 6R
Zx 6r To replace the front brake pads on a Kawasaki ZX 6R, loosen the screws securing the brake caliper to the corresponding disc so that the caliper can b…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos