Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plugs on the Kawasaki Vulcan 800, you need to remove the seat by loosening the bolt at the rear. Next, loosen the bolt located at the base of the fuel tank and on the dashboard: this will allow you to remove the dashboard by disconnecting the relevant connectors. Now you can also remove the fuel tank to access the spark plugs; these must be extracted from their housing and disconnected from the respective leads. Therefore, the new spark plugs should be connected to the appropriate leads and inserted back into their housings.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seat of the Kawasaki Vulcan 800
How to remove the seat of the Kawasaki Vulcan 800
Vulcan 800 Today's instructions will allow us to disassemble and replace the driver and passenger seats of the Kawasaki Vulcan 800 motorcycle. First, we put the…
How to Replace the Front Brake Pads on a Kawasaki Vulcan
How to Replace the Front Brake Pads on a Kawasaki Vulcan
Vulcan 800 To replace the front brake pads on a Kawasaki Vulcan, loosen the bolts securing the brake caliper to the brake disc, allowing it to be removed from i…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos