Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Kawasaki Ninja 250

Model: Kawasaki Ninja 250
Part: Air filter

Video tutorial

To replace the air filter on the Kawasaki Ninja 250, you need to remove the right side panel of the bike, located just below the fuel tank and seat. Once this is removed, you can access the cover of the filter box, which is secured with four screws.

After removing these four screws, you can detach the cover and pull out the underlying air filter, which needs to be removed from its housing. This will allow you to insert the new filter, covering it with the corresponding cover and side panel.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Kawasaki Ninja 250?
Ninja 250 In this tutorial, you will learn how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick task. First, wait until the engine is …
How to Change the Engine Oil in a Kawasaki Ninja?
How to Change the Engine Oil in a Kawasaki Ninja?
Ninja 250 In this tutorial, see how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick operation. First, ensure the engine is completely…
How to Replace the Brake Pads on the Kawasaki Ninja 250?
Ninja 250 To replace the brake pads on the Kawasaki Ninja 250, perform the same operation for both the front and rear wheels. In both cases, unscrew the bolt t…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos