Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z900
Part: Clutch

In this guide, discover the main instructions for removing and replacing the clutch discs on the Kawasaki Z900. First, place your motorcycle on a stand and disconnect the clutch cable attached to the casing by unscrewing the adjustment screw; then, unscrew the fixing screws located on the sides of the clutch casing, as shown in the video. At this point, unscrew the screws of the clutch pack, removing the pressure plate and then the clutch discs; finally, install the new one that is compatible with your engine!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake and Clutch Levers on a Kawasaki Z900
How to Replace the Brake and Clutch Levers on a Kawasaki Z900
Z900 In this video, discover the steps to remove and replace the brake and clutch levers on a Kawasaki Z900. First, remove the clutch lever; to do this, u…
How to Replace the Exhaust on the Kawasaki Z900
How to Replace the Exhaust on the Kawasaki Z900
Z900 You can replace the exhaust on the Kawasaki Z900 by loosening the screws that secure the exhaust end can to its housing, located near the rear mudgua…
How do you replace the levers of the Kawasaki Z900?
How do you replace the levers of the Kawasaki Z900?
Z900 In order to replace the levers of the Kawasaki Z900, you need to loosen the bolts that fix the lever to the side of the handlebars, so that it can be…

How do you replace the headlight bulb of the Sym Citycom 300?

In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle fairing: once the fastening screws of these panels have been loosened, you can unscrew those on the inside of the front fairing, so that the latter can be removed from its seat. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting its connector and removing the bulb inside; in this way you can reinstall the removed panels.

Watch the video!


by ScegliAuto

More videos