Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Kawasaki Z650RS

Model: Kawasaki Z650
Part: Clock

Video tutorial

In this mini guide for Kawasaki Z650RS owners, discover the steps to manually set the time displayed on the dashboard. First, turn on the dashboard, then press and hold the down arrow button located on the left knob.

Release it as soon as the hour starts to flash and press the up arrow to change the hours. To switch to minutes, press the down arrow again and repeat the same procedure.

Finally, once the correct time is set, turn off the dashboard and you are done.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Kawasaki Z650RS?
How to Change the Engine Oil of a Kawasaki Z650RS?
Z650 To change the engine oil of a Kawasaki Z650RS, first warm the engine slightly to reduce the oil's viscosity, allowing it to drain more easily. Once d…
How to Change the Time on the Kawasaki Z650
How to Change the Time on the Kawasaki Z650
Z650 In this new mini guide dedicated to your Kawasaki Z650, discover the steps you need to take to manually change the time displayed on the central dash…
Detailed Procedure for Setting the Instrument Cluster on the Kawasaki Z650
Detailed Procedure for Setting the Instrument Cluster on the Kawasaki Z650
Z650 The digital instrument cluster of the Kawasaki Z650 is fully customisable. To set the clock, press the right button until the time appears. Hold the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil in the Kawasaki ZX-10R?

In this tutorial, you will see how to change the engine oil in the Kawasaki ZX-10R, an extremely simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket. Allow all the oil contained in the engine to drain out, unscrew the old filter, and tighten the replacement. At this point, simply reinsert the bolt and add the required amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos