Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start a Kawasaki H2 750?

Model: Kawasaki H2 750
Part: Checks and maintenance

Video tutorial

To start a Kawasaki H2 750, use the kickstarter located on the right side of the engine. Ensure the bike is in neutral and the brake is engaged.

Insert the key into the ignition lock and turn it to the "on" position. Once done, pull the decompression lever, shift the gear lever into neutral, and make sure the kill switch is in the "on" position.

Position the kickstarter at the top of the crankshaft, then push or kick the kickstarter down with a quick, decisive action. Keep kicking until the engine starts.

Once started, release the decompression lever and allow the engine to stabilise. Pay attention to safety during this process and comply with local laws and road regulations.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp of the Kawasaki Vulcan 750
Vulcan 750 Discover in this brief and simple guide how to remove and replace the front headlamp, as well as the bulb, of the Kawasaki Vulcan 750. First, move to…
How to Set the Time on the Kawasaki Brute Force 750
How to Set the Time on the Kawasaki Brute Force 750
Brute Force 750 In this guide, you will find step-by-step instructions on how to manually adjust the time displayed on the dashboard of your 2021 Kawasaki Brute Forc…
Kawasaki Z 750 Battery Replacement
Kawasaki Z 750 Battery Replacement
Z750 In this video tutorial, follow the instructions to remove and replace the battery of a Kawasaki Z 750 in simple steps. First, remove the rear seat; t…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos