Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Kawasaki Versys, start by lifting the bike with a stand to ensure it is in a stable and horizontal position. Place a container under the oil drain plug, located at the bottom of the engine. Remove the drain plug with a suitable wrench and let the old oil drain completely into the container. After the oil has fully drained, replace the drain plug and tighten it with the wrench. Make sure the plug is well sealed to prevent leaks. Then, locate the oil fill cap, usually located on the top of the engine. Remove the fill cap and use a funnel to pour in the new motor oil, following the manufacturer's specifications for the type and quantity of oil needed. After pouring in the oil, replace the fill cap and tighten it securely. Start the engine for a few minutes to allow the oil to circulate properly inside the engine and check for leaks around the drain plug and fill cap. If everything is in order, turn off the engine and check the oil level to ensure it is correct. Complete the operation by cleaning any spills and disposing of the used oil according to environmental regulations. Your Kawasaki Versys is now ready with new motor oil.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Oil Filter on Kawasaki Versys 1000
How to Replace Engine Oil and Oil Filter on Kawasaki Versys 1000
Versys Today, you will learn how to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki Versys 1000. First, position your mo…
Change the Engine Oil and Oil Filter on a Kawasaki Versys 650
Change the Engine Oil and Oil Filter on a Kawasaki Versys 650
Versys In this video, we will see how to change the engine oil and oil filter, performing the regular maintenance service on a Kawasaki Versys 650 motorcycl…
How to change the engine oil on the Kawasaki Versys?
How to change the engine oil on the Kawasaki Versys?
Versys To change the engine oil on the Kawasaki Versys, loosen the oil drain plug located at the bottom of the bike. Once opened, collect the used oil in an…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos