Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : 125 Rks
Today we will dedicate ourselves to replacing the spark plug on our Keeway 125 RKS. To begin, we carefully remove the side fairings and the seat, in order to access the engine. We then find the cable that connects the spark plug to the coil and disconnect it gently. We then use an appropriate wrench to unscrew the spark plug from the cylinder head, being careful not to damage the engine. Once removed, we check the wear and cleanliness. Finally, we install the new spark plug following the reverse steps, making sure to tighten it properly to avoid leaks.

Posted on 28 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cylinder of the Keeway RKS 150?
How do you replace the cylinder of the Keeway RKS 150?
Rks 150 In order to replace the cylinder of the Keeway RKS 150, you need to disconnect the coil that is connected to the top of the cylinder; once the coil h…
How to Replace the Spark Plug of the Keeway Superlight 125?
How to Replace the Spark Plug of the Keeway Superlight 125?
Superlight 125 To replace the spark plug of the Keeway Superlight 125, disconnect the ignition coil located at the top of the engine block, accessible from the righ…
How do you disassemble the engine of the Keeway RKS 125?
How do you disassemble the engine of the Keeway RKS 125?
Rks 125 In order to disassemble the engine of the Keeway RKS 125, you must loosen the screws that secure it to its housing: subsequently it will also be poss…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos