Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the clutch of the Keeway Superlight 125, you need to loosen the screws that secure the cover casing located on the right side of the vehicle. Once the screws holding the casing are loosened, it will be possible to remove it completely from its seat in order to access the underlying discs. These can all be removed from their seat in order to insert new ones. Now it will be possible to secure them with the appropriate discs in order to cover everything with the casing and verify that everything works correctly.

Posted on 7 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to Replace the Throttle Cable on the Keeway Superlight 125
How to Replace the Throttle Cable on the Keeway Superlight 125
Superlight 125 To replace the throttle cable on the Keeway Superlight 125, loosen the appropriate nuts that secure the ends of the cable to its housing: these will …
How to replace the headlight bulb on the Keeway Superlight 125?
How to replace the headlight bulb on the Keeway Superlight 125?
Superlight 125 To replace the headlight bulb on the Keeway Superlight 125, loosen the screws around the lens of the headlight so that it can be removed from its hou…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos