Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Superlight 150
Today we will see the instructions that will allow us to start the engine of the Keeway Superlight 150 motorcycle. First, we put the motorcycle on the stand and make sure that the motorcycle is in neutral position; we check that the battery contact is closed (red button on the handlebar) and we start the engine by pressing the appropriate button on the right, as shown in the video. In case of cold start, it may be necessary to keep the engine at a slightly higher speed until it reaches operating temperature; we turn off the engine by turning the ignition key!

Posted on 27 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Muffler on a Keeway Superlight 150
Removing the Muffler on a Keeway Superlight 150
Superlight 150 In this video tutorial, you will learn how to remove the muffler on a Keeway Superlight 150 by following these simple steps. First, position your bik…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos