Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Keeway RKF 125?

Model: Keeway Rkf 125
Part: Exhaust muffler

Video tutorial

The exhaust pipe installed on the Keeway RKF 125 can be replaced by loosening the screws that hold it in place on the lower support near the crankshaft and on the mudguard at the rear of the motorcycle. Once these two screws are loosened, it will be possible to unscrew the two screws that hold the initial part of the exhaust pipe to the remaining part of the exhaust duct, at the front of the vehicle.

In this way, the old exhaust pipe can be completely removed from its seat, replaced with a new spare part, and checked for proper functioning.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 On board the Keeway RKF 125, it will be possible to replace the exhaust by loosening the screws that fix it at the lower support near the footrest an…
How to Replace the Exhaust on the Keeway RKF 125
How to Replace the Exhaust on the Keeway RKF 125
Rkf 125 The exhaust end can be replaced by loosening the screws that secure it at the lower support near the kickstart and at the rear wheel. Once these two …
How to Replace the Exhaust on a Keeway RKF 125?
How to Replace the Exhaust on a Keeway RKF 125?
Rkf 125 To replace the exhaust on the Keeway RKF 125, loosen the bolts securing it at the lower support near the kickstart and at the rear mudguard of the bi…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos