Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Icon
Part: Engine oil

To change the engine oil of a Keeway Icon, start by parking the motorcycle on a flat and safe surface, and make sure the engine is turned off and cold. Lift the motorcycle using a center stand to access the oil drain plug more easily. Place a container under the drain plug to collect the used oil. Remove the oil drain plug, usually located under the engine, using a suitable wrench. Let the oil drain completely into the container. Once the oil is fully drained, replace the drain plug and tighten it properly. Next, fill the engine with new oil through the filling hole, usually located on the top of the engine. Use a funnel to prevent spills and fill up to the recommended level by the manufacturer. After completing the filling, check for any leaks around the drain plug and make sure the engine has been filled correctly. Start the engine for a few minutes and then turn it off, allowing the oil to circulate. Check the oil level and add more oil if necessary. Make sure to dispose of the used oil and filters properly, following local regulations for material recycling.

Posted on 31 August 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the engine oil of the Keeway Icon?
How do you replace the engine oil of the Keeway Icon?
Icon To replace the motor oil on the Keeway Icon, you need to loosen the drain plug of the oil tank, which will be located in the central lower part of th…
How do you replace the motor oil of the Keeway Icon?
How do you replace the motor oil of the Keeway Icon?
Icon In order to replace the engine oil of the Keeway Icon, you need to loosen the drain plug located in the central lower part of the motorcycle, so that…
How to replace the transmission on the Keeway Icon?
How to replace the transmission on the Keeway Icon?
Icon You can replace the transmission on the Keeway Icon by loosening the screws that secure the gearbox cover, located near the rear wheel on the left si…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos