|
Do it yourself
| |||
| ||||
Model: Keeway Rcs 125
In order to replace the front brake pads of the Keeway RCS 125, you need to loosen the screws that secure the brake caliper to its housing on the disc, so that the caliper can be completely detached. Once the caliper has been removed from its seat, you will have access to the pads inside so that you can insert new ones. These can then be properly secured in place along with the corresponding caliper: after installation, you can verify that the caliper functions correctly.
Posted on 12 September 2025 by ScegliAuto
Video tutorial
Related tutorials
Rcs 125
The procedure for replacing the piston on the Keeway RCS 125 is carried out by loosening the screws that secure the cylinder of the engine block to i…
Rcs 125
To replace the piston of the Keeway RCS 125, loosen the screws securing the cylinder of the engine block to its housing at the top. Once the cylinder…
Rcs 125
To change the engine oil of the Keeway RCS 125, loosen the drain plug of the oil sump located at the bottom centre of the bike. Once the plug is remo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
