Do it yourself
Frequently asked questions about cars and motorcycles

Model: Keeway Rkv
Part: Engine oil

Change the engine oil on a Keeway Rkv motorcycle. Follow these steps for motorcycle maintenance. Position the motorcycle on the side stand, using a suitable spanner, unscrew the bolt from the oil sump (allow the oil to drain into a container); then, bring the motorcycle upright to ensure all oil drains from the sump. Unscrew the oil filter located on the right side of the motorcycle. Finally, top up the engine with new oil and close with the plastic cap (use a funnel). Use the appropriate oil specified in the manual. Test the engine operation.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Rkv 125 How to change the engine oil on a Keeway Rkv 125? Follow this guide to proceed with the replacement. Position the motorcycle on its centre stand (if …
Rkv 125 Today, follow these steps to perform the routine maintenance service by changing the engine oil and oil filter on a Keeway RKV 125 motorcycle. First,…
Rkv 200 Below are the main instructions for performing routine maintenance by replacing the engine oil and oil filter on the Keeway Rkv 200 motorcycle. First…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos