Do it yourself
Frequently asked questions about cars and motorcycles
Start the motorcycle for a few minutes to warm up the oil, making it more liquid for better drainage. Unscrew the cap for the upper fill hole and only then the lower one of the engine oil compartment. This will prevent a vacuum from forming, and the circulation of air will further aid the outflow of the used lubricant. Collect this in a container and dispose of it according to regulations. If it seems that the oil has not completely drained, slightly tilt your motorcycle. Measure how much lubricant you have drained, close the lower hole, and insert the same quantity of new oil through the upper hole.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Caf Racer 152 Warm the engine oil for a few minutes; otherwise, it will be too thick and won't drain from the bike. Start the engine for a few minutes, but don't o…
Caf Racer 152 To replace the air filter on the Keeway Caf Racer 152, loosen the bolts securing the cover on the right side of the bike. Once the bolts are loosened…
Caf Racer 152 Start the engine for a few minutes to warm the circulating oil, making it less viscous for easier draining. The drain hole is located at the bottom, …

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos