Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Warm the engine oil for a few minutes; otherwise, it will be too thick and won't drain from the bike. Start the engine for a few minutes, but don't overdo it, or you won't be able to work. The oil change is a very simple procedure: just remove the screw that seals the upper fill hole and then the one that seals the drain hole underneath the bike. Why do you remove the fill hole first? To allow air circulation inside the tank, preventing a vacuum. Close the lower hole and pour in the amount of oil that drained from the fill hole.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change on Keeway Café Racer 152
Oil Change on Keeway Café Racer 152
Caf Racer 152 Start the motorcycle for a few minutes to warm up the oil, making it more liquid for better drainage. Unscrew the cap for the upper fill hole and onl…
How to Replace the Air Filter on Keeway Caf Racer 152?
How to Replace the Air Filter on Keeway Caf Racer 152?
Caf Racer 152 To replace the air filter on the Keeway Caf Racer 152, loosen the bolts securing the cover on the right side of the bike. Once the bolts are loosened…
Oil Change on a Keeway CR152
Caf Racer 152 Start the engine for a few minutes to warm the circulating oil, making it less viscous for easier draining. The drain hole is located at the bottom, …

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos