Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on a Keeway CR152

Model: Kawasaki Caf Racer 152
Part: Engine oil

This video is currently unavailable

Start the engine for a few minutes to warm the circulating oil, making it less viscous for easier draining. The drain hole is located at the bottom, on the left side of the bike: you will notice a 24 mm hex bolt here.

Unscrew this bolt and collect the used oil in a container. Once done, you can screw the bolt back in, sealing the hole.

It is recommended for this model of bike to use synthetic oil for engines 20W-50. Clean any spilled oil and proceed to fill with new oil: the fill hole is near the footpeg, above the black compartment with the "Keeway" label.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Caf Racer 152 Start the motorcycle for a few minutes to warm up the oil, making it more liquid for better drainage. Unscrew the cap for the upper fill hole and onl…
Caf Racer 152 Warm the engine oil for a few minutes; otherwise, it will be too thick and won't drain from the bike. Start the engine for a few minutes, but don't o…
Caf Racer 152 To replace the air filter on the Keeway Caf Racer 152, loosen the bolts securing the cover on the right side of the bike. Once the bolts are loosened…

How to Replace the Exhaust on an Aprilia Sportcity 250

To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bottom and top of the exhaust. Once the support screws are loosened, remove the retaining ring that connects the exhaust to the remaining part of the exhaust pipe. Now, the old exhaust can be completely removed from its housing and replaced with a new spare part; after replacement, check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos