Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Keeway Superlight

Model: Keeway Superlight
Part: Battery

Video tutorial

In today’s video tutorial, you will learn how to remove and replace the engine battery on a Keeway Superlight. First, remove the plastic cover located on the left side of the bike; then unscrew the fixing screws of the battery cover using a socket wrench.

At this point, disconnect the two terminals (negative first, then positive) and then extract the old battery; all that’s left is to replace it with a new one of the same amperage and the original type, and reassemble everything, following the video tutorial to the end!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Keeway Superlight?
How to Replace the Air Filter of the Keeway Superlight?
Superlight To replace the air filter of the Keeway Superlight, loosen the screws securing the triangular cover located just under the seat on the right side of …
How to Replace the Front Headlight Bulb on a Keeway Superlight
How to Replace the Front Headlight Bulb on a Keeway Superlight
Superlight In this tutorial, we will see how to replace the front headlight bulb on a Keeway Superlight, a very simple and quick operation. First, ensure that t…
How to replace the front shock absorber on the Keeway Superlight?
How to replace the front shock absorber on the Keeway Superlight?
Superlight To replace the front shock absorber on the Keeway Superlight, loosen the nut that secures the central pin of the front wheel. By loosening the bolts …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos