Do it yourself
| ||||
|
Model: Keeway Txm 125
In order to replace the headlight bulb of the Keeway TXM 125 you need to loosen all the screws located near the fork and on the inside of the front fairing, in the positions indicated in the video. When these have been removed, it will be possible to detach the front fairing and remove the protective cap from the rear of the headlight. By removing the cap it will be possible to remove the bulb from its housing and disconnect it from its connector. Once the old bulb has been removed, it will be possible to replace it by connecting the new bulb to the connector and inserting it into its seat.
Posted on 6 March 2024 by ScegliAuto
|
How to replace the rear wheel on the Ktm Duke 390Below we will illustrate the guide on how to disassemble and replace the rear wheel of the Ktm Duke 390, following the instructions below. First of all we put the stand on our motorbike and we go to raise the rear wheel from the ground; then we unscrew the central pin of the wheel, disconnecting the chain from the crown, as shown in the video. At this point we remove the wheel and replace the rear sprocket or the brake disc, unscrewing the fixing screws; eventually replace the rear tire and reassemble everything, following the video tutorial to the end. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |