Do it yourself
Frequently asked questions about cars and motorcycles
In this video tutorial we will see how to remove and replace the battery of the Keeway Superlight 125. First of all, let's find the battery of our bike, which we find on the left side (under the saddle); we remove the lid to access it. At this point we unscrew the screws of the battery terminals (positive and negative pole) to remove it from the battery holder, as shown in the video; then we replace the battery with the new one, with one of the same amperage and having the same size. Now let's make the electrical connection and finally put the plastic cover back on!

Posted on 1 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Superlight 125 We begin by sitting on the driver's seat of our Keeway Superlight 125. After that, we will have to insert the key into the ignition, then turn the ke…
Superlight 125 In order to replace the spark plug of the Keeway Superlight 125, you need to disconnect the ignition coil located on the top of the engine block, acc…
Superlight 125 Below we will discover the main steps useful for disassembling and replacing the chain tensioner of the Keeway Superlight 125 transmission chain. Fir…

How to Replace the Coolant on a Derbi GPR 50

This guide will show you how to drain and replace the coolant in the engine of the Derbi GPR 50 motorcycle. First, place the motorcycle on a stand, ensuring the engine is cold. Disconnect the radiator hose from the water pump and let the fluid drain into a container for about ten minutes, as shown in the video. At this point, unscrew the radiator cap to refill with the correct type of antifreeze, adding more if necessary after starting the engine.

Watch the video!


by ScegliAuto

More videos