Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : C Light 125

How to Change the Engine Oil of the Keeway C-Light 125?

Model: Keeway C Light 125
Part: Engine oil

Video tutorial

To change the engine oil of the Keeway C-Light 125, loosen the oil drain plug located at the bottom of the bike. Once the plug is unscrewed, collect the used oil in a suitably positioned container.

This way, the oil will drain completely, and you can close the drain plug; after all the oil has drained out, extract the filter from the same position. You can then top up through the breather on the right side of the bike.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to change the engine oil of a Keeway K-Light 125
How to change the engine oil of a Keeway K-Light 125
K Light 125 .. Start by positioning your Keeway K-Light 125 upright using a motorcycle stand, then start and run the engine for a few minutes. Next, unscrew.. …
How to Change the Oil in a Keeway K-Light 125?
How to Change the Oil in a Keeway K-Light 125?
K Light 125 .. see how to change the engine oil in the Keeway K-Light 125, a very simple and quick operation to be carried out every 12 months. First, wait for the engine.. …
How do you replace the rear brake pads of the Keeway K-Light 125?
How do you replace the rear brake pads of the Keeway K-Light 125?
K Light 125 .. to replace the rear brake pads of the Keeway K-Light 125, you will need to loosen the screws that secure the brake caliper to the corresponding disc... …

How to Replace the Stator on the Triumph Daytona 675?

To replace the stator on the Triumph Daytona 675, loosen the screws that secure the cover located on the left side of the bike: once these screws have been removed, detach the cover and access the underlying stator. The stator can be removed from its housing by unscrewing the central screws that secure it: this way, you can insert a new stator into its housing, re-inserting the side starter motor. Once these components have been reinserted, close everything with the cover.

Watch the video!


by ScegliAuto

More videos