|
Do it yourself
| |||
| ||||
|
Model: Keeway K Blade 125
To replace the gear oil on the Keeway K-Blade 125, loosen the bolt securing the drain plug of the gear oil reservoir, located near the rear wheel of the motorcycle, right next to the gearbox casing. Once the plug is removed, collect the used oil in a suitably positioned container. After all the oil has drained out, insert the new fluid through the designated filler hole above the drain hole: this way, you can ensure that the gearbox operates smoothly.
Updated on 27 July 2026 by ScegliAuto
Video tutorial
Related tutorials
K Blade 125
.. To change the gear oil on a Keeway K-Blade 125, loosen the bolt that secures the oil drain plug located near the rear wheel of the bike, right.. …
K Blade 125
.. To change the engine oil on a Keeway K-Blade 125, unscrew the oil drain plug located at the central bottom of the vehicle. Once the plug is.. …
K Blade 125
.. replace the rear shock absorber on the Keeway K-Blade 125, loosen the screws that secure this component to its housing: the screws are located near the.. …
|
How to Change the Speed Unit on the Piaggio Mp3
If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
