Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the tire pressure on a Kia Stonic

Model: Kia Stonic Ybcuv, MK 1 - Years 2017-2026
Part: Checks and maintenance

Before performing this procedure, it is important to check the correct pressure of all four tires as indicated by the manufacturer. When the tires are at the correct pressure, it will be possible to reset the warning light, but let's see how to proceed immediately. First, we need to start the car, then press and hold the "SET" button located on the panel to the left of the steering wheel. Once we do this, we will see the pressure warning light start to flash, so we continue to hold down "SET" until the light disappears to complete the job.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Kia Stonic?
How do you reset the tire pressure warning light on the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the tire pressure warning light of the Kia Stonic, you need to inflate the tires to the recommended pressure value: this value is indicated …
Resetting Tyre Pressure Light on Kia Stonic
Resetting Tyre Pressure Light on Kia Stonic
Kia Stonic (2017-2026 / Ybcuv, MK 1) Today, you will learn how to reset the tyre pressure light on a Kia Stonic. Before performing the reset operation, ensure that all issues related to …
How to reset the tyre pressure warning light on the Kia Stonic?
How to reset the tyre pressure warning light on the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the tyre pressure warning light on the Kia Stonic, first inflate the tyres to the correct pressure: this value is indicated on the sticker a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos