Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Tyre Pressure Light on Kia Stonic

Model: Kia Stonic Ybcuv, MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

Video tutorial

Today, you will learn how to reset the tyre pressure light on a Kia Stonic. Before performing the reset operation, ensure that all issues related to the pressure variation of one or more tyres have been resolved; once everything is repaired, proceed with the reset.

First, get inside the car and start the vehicle: then press the set button located below the steering wheel and hold it until the light flashes and turns off (it only turns off if the pressure of all four tyres is optimal).


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Kia Stonic?
How to Reset the Tyre Pressure Warning Light on a Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) The tyre pressure warning light displayed on the instrument panel of the Kia Stonic can be reset by first inflating the tyres to the recommended pres…
Where is the tire pressure warning light reset button located in the Kia Stonic?
Where is the tire pressure warning light reset button located in the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) It is important to remember that resetting the tire pressure anomaly warning light in any car, including the Kia Stonic, should only be done after fi…
How to reset the tyre pressure warning light on the Kia Stonic?
How to reset the tyre pressure warning light on the Kia Stonic?
Kia Stonic (2017-2026 / Ybcuv, MK 1) To reset the tyre pressure warning light on the Kia Stonic, inflate the tyres until they reach the correct pressure value. Once the tyres are inflate…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos