Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the radio from a 2017 Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Car stereo

Let's see how to disassemble the car radio from a 2017 Kia Sportage: we will need a screwdriver, a plastic spatula, and a non-serrated blade. The first thing to remove is the central console, where the gear lever is located: it is not necessary to remove it completely, just loosen it a bit, in order to create space to move the dashboard trim, then with the plastic spatula, we remove the side cover of the dashboard, where we find a screw to remove; once this is removed, we lever with the butter knife to remove the dashboard trim, which now comes off easily, except for the connectors in the central part of the dashboard. Now we have made two screws visible, so we can remove the frame containing the screen and the air vents. We lever with the plastic spatula and remove the entire block of vents. Now we have four screws to remove and the device comes off, after disconnecting the electrical connectors and the antenna on the back.

Posted on 28 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Kia Sportage (2016-2022 / QL, MK 4) In this guide we will see the instructions that will allow us to disassemble and replace the original radio of the Kia Sportage, in simple steps. Fir…
Kia Sportage (2016-2022 / QL, MK 4) Below, we will see the instructions that will allow you to reset the standard radio in a Kia Sportage in simple steps: First, get inside the vehicle …
Kia Sportage (2010-2016 / SL, MK 3) Before you begin, sit in the driver's seat of your Kia Sportage. Start by prying off and removing the side covers of the dashboard using a thin but s…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos