Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the original radio of the Kia Sportage

Model: Kia Sportage QL, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Car stereo

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the original radio of the Kia Sportage, in simple steps. First of all, we get on board the car and start removing the side plastic cover of the dashboard, levering on the sides; then we remove the partition located in the central part, under the radio, as shown in the video.

At this point, we unscrew the fixing screws of the radio and disconnect the wiring found on the back, in order to remove it; we repair it or replace it with the new one, reassembling the dashboard partition.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

Removing the Car Radio from Kia Sportage 2
Removing the Car Radio from Kia Sportage 2
Kia Sportage (2004-2010 / MK 2, KM) Today, follow the steps to remove the original car radio from a second-generation Kia Sportage. First, get inside the car and gently pry the plastic …
How to Reset the Sound Settings on the Kia Sportage Radio
How to Reset the Sound Settings on the Kia Sportage Radio
Kia Sportage (2016-2022 / QL, MK 4) Follow these instructions to reset the sound settings on the Kia Sportage radio. First, get in the vehicle and turn on the ignition; then turn on the…
How to Replace the Car Radio on Kia Sportage
How to Replace the Car Radio on Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) In this video tutorial, see how to remove and replace the original car radio with a compatible one for the Kia Sportage: first, remove the caps using…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos