Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Car Radio from Kia Sportage 2

Model: Kia Sportage MK 2, KM - Years 2004-2010
Part: Car stereo

Today, follow the steps to remove the original car radio from a second-generation Kia Sportage. First, get inside the car and gently pry the plastic frame of the car radio to detach and remove it; then disconnect the electrical connectors at the back. Next, unscrew the side fixing screws of the car radio to extract it from its housing; finally, disconnect the power connector and the antenna cable to remove it completely!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Sportage (2016-2022 / QL, MK 4) Follow these instructions to reset the sound settings on the Kia Sportage radio. First, get in the vehicle and turn on the ignition; then turn on the…
Kia Sportage (2010-2016 / SL, MK 3) Before you begin, sit in the driver's seat of your Kia Sportage. Start by prying off and removing the side covers of the dashboard using a thin but s…
Kia Sportage (2004-2010 / MK 2, KM) As shown in this tutorial, replacing the car radio in a KIA Sportage is an extremely simple and quick operation. First, unclip the centre console con…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos