Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Kia Sorento

Model: Kia Sorento MK 4 - Years 2020-2026
Part:

The tire pressure must be adjusted following the indications on a label from the vehicle manufacturer. On Kia Sorrento vehicles, the label is placed inside the driver's side door. The TPMS light turning on indicates the need to adjust the tire pressure; once the adjustment is done, we can start the engine and drive on a straight and flat road for about 20km to reset the light. If the reset is not successful, it is necessary to check the functioning of the tire pressure sensors.

Posted on 27 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Kia Sorento
Resetting the Tyre Pressure Warning Light on the Kia Sorento
Kia Sorento (2020-2026 / MK 4) Let's briefly review the instructions for resetting the tyre pressure warning light (TPMS) on the Kia Sorento; before performing the reset, ensure th…
How to reset the tire pressure warning on the Kia Sorento
How to reset the tire pressure warning on the Kia Sorento
Kia Sorento (2020-2026 / MK 4) Today we will discover the instructions that will allow us to reset the tire pressure warning on the Kia Sorento; before performing the TPMS sensor r…
How to reset the oil light on the Kia Sorento 4
How to reset the oil light on the Kia Sorento 4
Kia Sorento (2020-2026 / MK 4) If you own a Kia Sorento Mk4 and need to manually reset the oil light, simply follow the steps described below carefully and apply them step by step.…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos