Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : How to reset the tire pressure warning light on the Kia Sorento MK4

Kia Sorento - Video tutorial

Model: Kia Sorento MK 4 - Years 2020-2024
Part: Checks and maintenance
Operation: How to reset the tire pressure warning light on the Kia Sorento MK4

In today's video we will see how to proceed with the reset of the TPMS warning light, or tire pressure, on the fourth series Kia Sorento (2021); before boarding the car, all four tires must be at the operating pressure indicated in the use and maintenance manual or on the plate found when opening the door. At this point we get inside the car and turn on the ignition; if all four tires are at the right pressure then we will see that the TPMS warning will disappear from the instrument panel, to check this we go to the tire control item.


Posted on 10 May 2024 by ScegliAuto



How do you reset the tire pressure warning light on the Kia Sorento?
Kia Sorento (2020-2024 / MK 4) In order to reset the Kia Sorento tire pressure warning light, all tires must be brought back to the recommended inflation pressure: this pressure va
Resetting the tire pressure warning light of the Kia Sorento.
Kia Sorento (2020-2024 / MK 4) Let's briefly see the instructions that will show us how to reset the tire pressure monitoring system (TPMS) light on the Kia Sorento. Before perform
How do you reset the tire pressure warning light on the Kia Sorento?
Kia Sorento (2014-2020 / MK 3) In order to reset the tire pressure warning light of the Kia Sorento, first you need to inflate the tires, bringing them back to the correct inflatio

    Frequently Asked Questions

    • Sorento 2014-2020 - What problems does the Kia Sorrento 2.5 crdi have? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos