Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Dashboard of a Kia Sorento

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Instrument cluster

Learn how to remove the centre dashboard by extracting the original multimedia screen of a Kia Sorento. Pry at the plastic trim of the instrument panel (between the frame and the dashboard) until it detaches from the dashboard. Remove the multimedia system frame (as shown in the video). Unscrew the perimeter screws of the car's multimedia system and pull it out of its housing. Disconnect the power cables, antenna, and fuse holder of the stereo (if present). Fit the new multimedia system into the centre dashboard. Finally, test its proper functioning.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the radio of the 2014 Kia Sorento
How to disassemble the radio of the 2014 Kia Sorento
Kia Sorento (2014-2020 / MK 3) To successfully disassemble the factory radio inside the cabin of your 2014 Kia Sorento, you must follow the steps described in our new guide. First,…
Replacing the Rear Wheel Bearing on the Kia Sorento
Replacing the Rear Wheel Bearing on the Kia Sorento
Kia Sorento (2009-2014 / MK 2) This guide shows you how to remove and replace the rear wheel bearing on the Kia Sorento, following these simple and quick steps. First, lift the veh…
How to Replace the Window Regulator on a Kia Sorento?
How to Replace the Window Regulator on a Kia Sorento?
Kia Sorento (2002-2009 / MK 1) To replace the window regulator on a Kia Sorento, remove the door panel by unscrewing the appropriate fixing screws. The screws are located on the si…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos