Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : Remove the external handle on the kia Sorento

Kia Sorento - Video tutorial

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Handle
Operation: Remove the external handle on the kia Sorento

Do you want to remove the external handle (driver's side) on the kia Sorento? Let's see briefly how to disassemble and remove it from the door housing. In order to remove the lock, we need a screwdriver or key with insert, let's see: unscrew the screw on the side of the door with the screwdriver (remove the rubber cap), remove the left cover of the handle, then scroll the handle to the left of the door. We remove the door opening handle and insert the new piece into the door. Finally we hook the handle and tighten it with the appropriate screwdriver.


Posted on 7 November 2023 by ScegliAuto



How to remove the external door handle of the Kia Sorento.
Kia Sorento (2002-2009 / MK 1) In this short and simple guide, we will see the necessary steps to disassemble and replace the external handle of the rear door of the Kia Sorento. F
How to replace the external handle of the front door of the Kia Sorento
Kia Sorento (2014-2020 / MK 3) Today we will see the process of disassembling and replacing the external handle of the front door of the Kia Sorento. First, we open the front door
How to remove the door handle of a Kia Sorento
Kia Sorento (2002-2009 / MK 1) Let's see how to remove and assemble the external handle placed above the door of a Kia Sorento. Unscrew the fastening screws (side plate) with a sui

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos