Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of the Kia Sorento

Model: Kia Sorento MK 1 - Years 2002-2009
Part: Handle

This brief and simple guide outlines the steps necessary to remove and replace the external door handle of the rear door of the Kia Sorento. First, open the rear door and begin to dismantle and remove the door panel by unscrewing all the fastening screws; then unscrew the handle screws located on the side of the door, pulling it out from the outside, as shown in the video. At this point, install the new handle, securing it properly and checking the opening function, following the video tutorial to the end!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the External Handle on Kia Sorento
Remove the External Handle on Kia Sorento
Kia Sorento (2009-2014 / MK 2) Do you want to remove the external handle (driver's side) on a Kia Sorento? Here's how to take it off and remove it from the door housing. To remove …
How to replace the external handle of the front door of the Kia Sorento
How to replace the external handle of the front door of the Kia Sorento
Kia Sorento (2014-2020 / MK 3) Today we will see the process of disassembling and replacing the external handle of the front door of the Kia Sorento. First, we open the front door …
How to Remove the Door Handle on a Kia Sorento
How to Remove the Door Handle on a Kia Sorento
Kia Sorento (2002-2009 / MK 1) Learn how to remove and install the external handle located above the door on a Kia Sorento. Unscrew the securing screws (side panel) with the approp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos