Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wheel Bearing on the Kia Sorento

Model: Kia Sorento MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Bearing

See other generations:
Video tutorial

This guide shows you how to remove and replace the rear wheel bearing on the Kia Sorento, following these simple and quick steps. First, lift the vehicle and start by removing the rear wheel; then undo the bolts securing the brake caliper to remove it from the disc, as illustrated in the video.

Next, unscrew the central nut of the bearing to remove it along with the brake disc (by undoing the additional screws); now replace the bearing with the new one, applying the reverse procedure for reassembly!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Kia Sorento 2.2
Guide to Replacing the Timing Belt on the Kia Sorento 2.2
Kia Sorento (2020-2026 / MK 4) Today, we will discover the steps and instructions to remove and replace the timing belt on the Kia Sorento 2.2. First, raise the vehicle and begin b…
How to Replace the Rear Lights and Bulbs on the Kia Sorento
How to Replace the Rear Lights and Bulbs on the Kia Sorento
Kia Sorento (2014-2020 / MK 3) Today, we will go through the steps to remove and replace the rear light and its bulbs on the Kia Sorento. First, open the boot lid and start by remo…
How to Remove the Rear Bumper on the KIA Sorento?
How to Remove the Rear Bumper on the KIA Sorento?
Kia Sorento (2014-2020 / MK 3) In this tutorial, you will see how to remove the rear bumper on the KIA Sorento, a very simple and quick operation. First, open the boot lid and remo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos