Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bearing on a KIA Optima?

Model: Kia Optima / K5 JF, MK 4 - Years 2015-2020
Part: Bearing

In this tutorial, you will see how to replace a rear wheel hub bearing on a KIA Optima. This operation is simple but requires careful attention. First, lift the car with a jack, then remove the wheel and disassemble the shock absorber, taking care not to let the spring come out of its seat. Next, disconnect the upper arm, unscrew the bolt located directly in front of it, and completely remove the brake caliper. At this point, you can unscrew the two screws of the disc, remove it, and unscrew the four hub mounting bolts located at the back. When extracting it, be careful not to disassemble the handbrake drum.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Kia Optima
How to replace the rear headlight bulb of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In the following guide, we will explain the various steps you need to take in order to properly replace the rear headlight bulb of your Kia Optima. F…
How to Replace the KIA Optima Remote Battery
How to Replace the KIA Optima Remote Battery
Kia Optima / K5 (2015-2020 / JF, MK 4) In this tutorial, you will see how to replace the KIA Optima remote battery, a very simple and quick operation. You will only need a small flat-head …
Removing the External Rear-View Mirror of the Kia Optima
Removing the External Rear-View Mirror of the Kia Optima
Kia Optima / K5 (2010-2015 / MK 3, TF) In this guide, we will see the procedure for removing and replacing the external rear-view mirror of the Kia Optima. First, open the front door of th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos