Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on the Kia Borrego?

Model: Kia Mohave Borrego HM - Years 2008-2019
Part: Bearing

To replace the front wheel bearing on the Kia Borrego, lift the vehicle with a jack so that the corresponding wheel does not touch the ground. Then, loosen the bolts securing the wheel and remove it from its hub to access the components at the back. By also loosening the screws that secure the brake caliper and removing the rotor, you can access the bearing. This should be removed with a puller and then replaced with a new one. After the replacement, reinstall all removed components.

Updated on 10 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Rear Shock Absorber in a Kia Borrego?
Kia Mohave Borrego (2008-2019 / HM) To replace the rear shock absorber in a Kia Borrego, loosen the bolts that secure the shock absorber at both the upper and lower ends, corresponding …
Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
Guide to Removing the Kia Mohave Borrego Radio
Guide to Removing the Kia Mohave Borrego Radio
Kia Mohave Borrego (2008-2019 / HM) Discover the procedure and main steps to remove and replace the factory radio of the Kia Mohave Borrego. First, get inside the vehicle and start by r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos