|
Do it yourself
| |||
| ||||
How to replace the brake drum bearing of the Kia Pride.
Today we will go over the main instructions on how to disassemble and replace the brake drum bearing of the Kia Pride. First, we lift the vehicle and start by removing the wheel; then we remove the cotter pin from the center nut, unscrewing the nut to take off the drum, as shown in the video. At this point, we will use a puller to remove the drum bearing, replacing it with the new original one (heating the affected area to facilitate insertion); we then reassemble the drum onto the braking system, correctly reattaching and securing the wheel.
Posted on 6 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Kia Pride
(1987-2000 /
MK 1)
Today, we will discover the main instructions on how to remove and replace the instrument cluster on a Kia Pride in simple steps. First, get into the…
Kia Pride
(1987-2000 /
MK 1)
To change the oil and replace the oil filter on the Kia Pride, follow these steps. First, lift the car with a jack if possible to access under the oi…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.630
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
