Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : How to reset the TPMS light on the 2021 Kia Sorento?

Kia Sorento - Video tutorial

Model: Kia Sorento MK 4 - Years 2020-2024
Part: Checks and maintenance
Operation: How to reset the TPMS light on the 2021 Kia Sorento?

The TPMS warning light comes on in a vehicle when the tire pressure does not meet the parameters required by the manufacturer. After inflating the tires to the manufacturer's specifications, it is necessary to reset the system. On a 2021 Kia Sorento, the reset is done manually. We turn on the vehicle's ignition and then press the SET button located on the center console. We hold the button down until the warning light starts flashing and then goes off completely, at which point we release the button. We turn off the ignition and then turn it back on to verify that the warning light has turned off.


Posted on 1 October 2023 by ScegliAuto



Resetting the tire pressure warning light of the Kia Sorento.
Kia Sorento (2020-2024 / MK 4) Let's briefly see the instructions that will show us how to reset the tire pressure monitoring system (TPMS) light on the Kia Sorento. Before perform
How to reset the tire pressure warning light on the Kia Sorento MK4
Kia Sorento (2020-2024 / MK 4) In today's video we will see how to proceed with the reset of the TPMS warning light, or tire pressure, on the fourth series Kia Sorento (2021); befo
How to reset the oil warning light on the Kia Sorento 2021
Kia Sorento (2020-2024 / MK 4) In this our new mini guide dedicated to your new Kia Sorento 2021 we will find out together what are the various steps to perform in order to manuall

    Frequently Asked Questions

    • Sorento 2014-2020 - What problems does the Kia Sorrento 2.5 crdi have? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos