Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to tighten the handbrake of the Kia Sportage.

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Parking brake

In today's article, we will see how to tighten the handbrake of the Kia Sportage. For this operation, a 10mm socket wrench will be necessary. To tighten the handbrake, you need to get in from the passenger side. Along the center tunnel, there is a handle; grasp the handle and pull it upwards. Once you have slightly lifted the front part of the center tunnel, use leverage to lift it further so you can access the handbrake screw. Now, use the 10mm wrench to adjust the handbrake. Once you have tightened the screw sufficiently and adjusted the handbrake, close the center tunnel by pressing down with your hands.

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake of the Kia Sportage
How to adjust the handbrake of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In today's video tutorial, we will see the entire procedure necessary to adjust the handbrake on a Kia Sportage, a third-generation model produced fr…
How to Adjust the Handbrake on the Kia Sportage 3
How to Adjust the Handbrake on the Kia Sportage 3
Kia Sportage (2010-2016 / SL, MK 3) Adjusting the handbrake on the Kia Sportage 3 is a straightforward task, but for safety reasons, it is advisable to have it done by a qualified mecha…
How to Adjust the Handbrake on the Kia Sportage
How to Adjust the Handbrake on the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this brief and simple guide, you will find instructions to adjust the handbrake on the Kia Sportage. First, get inside the vehicle and remove the …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos