|
Do it yourself
| |||
| ||||
How to Change Tyres on a Kia Sportage
Model: Kia Sportage
QL, MK 4
- Years 2016-2022
In this video, learn how to change the tyres on a 2017 Kia Sportage: the jack is located in the boot, under the load floor, and the spare wheel is secured with a large nut under the boot. There are specific lifting points on the chassis under the bodywork: these are reinforced "pockets" or recesses. Before lifting the vehicle, slightly loosen the wheel nuts with the spanner, turning counterclockwise. If they are very tight, use your foot on the spanner for leverage; then slowly lift the car until the wheel is a few centimetres off the ground. Remove all the nuts, take the flat tyre and place it under the car (this is an extra precaution in case the jack fails). Place the spare wheel onto the hub, hand-tighten the nuts, then lower the car until the wheel is resting on the ground. Remove the jack, tighten the nuts with the spanner, and store the flat tyre, jack, and all tools in their compartment. The spare wheel is an emergency wheel, so drive cautiously and replace it as soon as possible.
Posted on 30 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Kia Sportage
(2010-2016 /
SL, MK 3)
To reset the tire pressure warning light on the Kia Sportage, you need to inflate the tires to the recommended pressure value: this value is indicate…
Kia Sportage
(2016-2022 /
QL, MK 4)
To reset the tyre pressure warning light on the Kia Sportage, first inflate the tyres to the correct inflation pressure: this value is indicated on t…
Kia Sportage
(2010-2016 /
SL, MK 3)
To reset the tyre pressure light on the Kia Sportage, there is no specific procedure to follow. You need to identify which tyres are under-inflated a…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.122
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |